"From March 2006 to February 2007, the average price utilities paid their gas suppliers was about 3 times the level seen in the 1990s,” documents the PSC. As a result, the demand for ultra-high efficiency boiler plants has also increased exponentially. Heat & Power Products is rolling out our educational campaign called Sweet-Heat to address this demand. Through this campaign we will provide detailed information on ultra-high efficiency boiler technologies so you are prepared when your customer asks.
|
|
|
dualArm SERIES 4302 AND 4382
Armstrong’s dualArm vertical in-line pumps incorporate two Series 4300 or 4380 pumps in a single casing. The Series 4302 is designed with split spacer type couplings so that the mechanical seals can be serviced without disturbing the pump or motor connections, and is available with outside balanced or inside seals. The Series 4382 is an economical close coupled design. Both types are supplied with a swing discharge port in order to hydraulically separate the casings and prevent recirculation when only one pump operates. Isolation valves enable the isolation of one pump for service or removal with the second pump still operating.
Request Information Back to top
|
 |
|
|
IVS SENSORLESS SERIES
The IVS Sensorless pump is designed to meet the need for energy-efficient pumping systems in today's buildings. Traditional pumping systems incorporating fixed-speed pumps waste energy through crude throttling valve flow control. The IVS Sensorless automatically adjusts operating speed to match the system load at all times. The resulting energy savings can pay for the initial cost of the pump in as little as three years.
Request Information Back to top
|
| |
|
|
FULTON PULSEPAK
Sizes: 300 -2,000 MBH. 60, 100 and 160 PSI
Features: sidewall vented, efficiencies up to 98%, full Modulation with 5:1 turndown, may be skid mounted and prepiped to create a complete system. No minimum flow rates or return water temperatures requirements.
Request Information Back to top
|
| |
|
|
FULTON VANTAGE
Sizes: to 3,000,000Btu/hr
Features: Provides maximum performance and an input of 3,000,000 Btu/hr, making it the perfect boiler for any large heating application. The VANTAGE is designed with a large condensing heating surface. The result is a reliable boiler which reaches maximum efficiencies possible for the corresponding return water temperature.
Request Information Back to top
|
| |
|
|
PULSE DOMESTIC WATER MODEL DWH
Sizes: 1,000 MBH
Features: Efficiencies to 99%, Precise Temperature Control, Fully Condensing, ASME Section VIII. Constructed from stainless steel alloy Duplex 2205 to resist chloride stress. Small footprint to fit thru standard doors.
Request Information Back to top
|
| |
|
|
PATTERSON-KELLEY MACH
Sizes: 300 – 1050 MBH, 80 PSI
Features: Achieve up to 99% Efficiency. 5:1 Turndown Burners. Sealed Combustion, Low Mass Design, Small Foot Print, Natural Gas and LP fired. Whisper Quiet
Request Information Back to top
|
| |
 |
PK HYBRID HEATING PLANT
Sizes: 1,000 to 20,000 MBH
Features: Combines non-condensing and condensing boilers into innovative boiler room solution by dividing the load between the boilers assigning the right boiler based on current load conditions and water temperature requirements. We call this a hybrid system, and it offers 100 percent of the efficiency benefits while reducing the first-costs.
Request Information Back to top
|
| |
|
|
ECONOMIZERS (AIR TO WATER)
Recover waste heat from the boiler flue gas and transfer heat to desired heat sink (boiler feed water, domestic water, etc.)
- Increases overall boiler efficiency
- Vertical, horizontal and cylindrical arrangements.
- Payback analysis available.
Representing: Cain, ERI
Request Information Back to top
|
| |
|
|
